FANCUT 42 MOST is a plasma cutting machine with a current range up to 40 A and single-phase 230 V power supply.
The unit is equipped with a PFC (Power Factor Correction) module. The advantage of inverters equipped with PFC module is higher efficiency, lower electric power consumption load (a weaker fuse is required), greater tolerance to supply current fluctuations and less interference generated by the cutter. The device has a lower weight than older units of similar power and is equipped with a factory-mounted pressure regulator.
Cutting Set – FANCUT 42 includes:
FANCUT 42 is equipped with ABICUT 45 cutting torch
Unpack and work!
The FANCUT 105 HD is designed for quality cutting of metals with a thickness up to 45 mm using air plasma. Control of the process is performed from a modern panel with liquid crystal display.
Apart from regulation of the current the cutting mode (continuous cutting, net cutting or gouging) and the working air pressure can be set. It is also possible to adjust the brightness of the display, select the pressure unit and provide information on the current operating status of the device.
The operating pressure is regulated by a built-in proportional valve, which minimizes the impact of input pressure fluctuations.
The „fan on demand” function runs the fan only when needed, which saves electricity and reduces dust contamination inside the cutting machine. In standby mode, the FANCUT 105 HD consumes only 25 watts.
Qualitative maximum cutting thickness of plasma Units:
Cutting Set – FANCUT 105 HD includes:
The FANCUT 105 HD is equipped with a plasma cutting torch SVH-105, which is a modern plasma cutting torch with pneumatic-contact ignition (without HF). Cutting is done exclusively by guiding the nozzle tip along the material, there is no need for spacers.
Unpack and work!
The MOST PYXAR welding helmet combines the original design of the welding helmet shape with a modern, digitally controlled automatic filter equipped with LCD displays and a specialized YAG laser protection filter.
Application:
Welding helmet MOST PYXAR with YAG laser protection filter:
Welding helmet MOST PYXAR with YAG laser protection filter is Suitable for the MOST PX-FLOW forced air flow system.
The MOST PYXAR AIR welding helmet, in addition to the advantages of the basic version of the helmet, has the ability to easily connect the MOST PX-FLOW forced airflow system. Using several different types of filters, the air supply unit provides the user with clean and dry air, ensuring respiratory protection at a high TH3 level.
Benefits of PX-Flow system:
The helmet is available in two versions:
FLIP-UP version giving the user a large field of view, facilitating other work besides welding.
- Carrying bag included in set.
Welding helmet MOST PYXAR is a combination of unique design of the helmet shell and modern, digitally controlled auto-darkening filter provided with LCD display.
This welding helmet is equipped with head protection, which protects against spatters and disadvantageous out light, thus increasing the user’s work comfort and security.
Additionally, MOST PYXAR has specially extruded, thick, scratch-resistant front cover lens.
Specially designed shape of the welding helmet protects the external lens from scratching, while the helmet is not in use.
Headgear is highly adjustable according to individual’s needs.
The helmet is suitable for any welding process and after pressing the GRIND button, located above the automatic filter, it is also suitable for grinding.
Welding helmet MOST PYXAR characteristic:
The new generation of handheld laser welding machines features compact size, light weight, flexibility of use and simplicity of operation. These devices allows welding of stainless steel, carbon steel, aluminium, galvanized sheet metal, copper and other metals. Using advanced laser technology, the welder provides efficient welding at speeds higher than with TIG and MIG/MAG welding methods. Welds made with the laser welding machine are smooth and rounded. The welding process does not cause material deformation or burn-through, eliminating the need for subsequent grinding or polishing. As a result, general production efficiency is significantly improved, while the consumption of consumables and production costs for each component are reduced.
Support wobble welding, optional in wire feede
Laser control system support wobbly frequency and width control, can achieve up to 4,0 mm weld width, weld at one time and high aesthetics, good consistency. Combine with wire feeder, help to improve to full fill the welding gap, make up the cutting defects from last process, normally support welding wire diameter 1,0/1,2/1,6 mm, suitable for carbon steel, stainless steel, aluminium, non-ferrous metal and alloy.
The MOST XTW laser welding machine has been widely used in joining materials with thicknesses up to 6 mm. Various types of materials and shapes can be joined with a laser beam (also with the use of welding wire). The obtained joints are aesthetic and durable, and deformations are negligible. In most cases no mechanical treatment is required after the welding process is completed. Laser welding is one of the most modern welding methods, it become a competition for advanced welding processes, incl. electron welding. The welding process is very efficient and it can be used to combine various shapes in all welding positions, which increases the efficiency of production processes.
Advantages of laser welding:
Laser head and controls
The welding precision is determined by the head, which in case of the MOST welding machine is a biaxial head, which allows for setting several types of oscillation - operating modes.
The head has a display with the currently set parameters of the device, such as output power, type of oscillation, frequency and beam working area width.
PONTIG 300 DC MOST is modern inverter rectifiers for TIG DC welding of steel and stainless steel MMA coated electrode welding. PONTIG 300 DC is efficient industrial devices electrically powered by 3x400 V.
Main applications:
TIG welding is performed with a direct current up to 200 Hz. In MMA method a VRD safety function is available for reducing open circuit voltage to 12 V. PONTIG 300 DC allows to set all additional functions required for professional TIG welding (gas pre/post flow, current rising, crater filling, etc.). The machine is deigned to work with different types of liquid-cooled or gas-cooled TIG torches after switching off the cooler (settings of internal menu) also if liquid connections at the front of the radiator were bridged Control panel equipped with display presents welding process functions. Parameter setting is executed with single knob used both for choosing and confirming functions or values.
Welding Set- PONTIG 300 DC includes:
PONTIG 300 DC supplied with a mass cable, a gas hose and a User's Manual.
Unpack and weld!
PONTIG 315 AC/DC MOST is modern inverter rectifier for TIG DC welding of steel, stainless steel, TIG AC aluminium welding and MMA coated electrode welding. It is an effective industrial equipment electrically powered by 3x400 V.
Main applications:
TIG DC welding is performed with a direct or pulsating current of up to 200 Hz. Additional settings improving the weld quality or welding speed are available for TIG AC aluminium welding with alternative current e.g. different shapes of AC wave. MMA method offers VRD safety function for reducing open circuit voltage to 12 V. PONTIG 315 AC/DC allows you to set all additional functions required for professional TIG welding (gas pre/post flow, current rising, crater filling, etc.).
PONTIG 315 AC/DC can work with different types of liquid-cooled or gas-cooled TIG welding torches after switching off the cooling unit or if liquid connections at the front of the cooling unit were bridged.
Welding Set – PONTIG 315 AC/DC includes:
PONTIG 315 AC/DC is factory equipped with cooling unit and transport trolley. Cooler FANCOOL 300 is empty. Please fulfil it with 5 litres of colling liquid COOL 30 MOST (included in delivery).
Unpack and weld!
FANMIG 5 PULSE is new inverter MIG/MAG semi-automatic welding machines for industrial work. Model FANMIG 5 PULSE WP/5 m - 500 A is prepared as power source with separate feeder (5 m intermediate cable) and liquid-cooled welding torch.
The main advantages of FANMIG 5 PULSE equipment:
Welding Set - FANMIG MOST 5 PULSE WP includes:
Units supplied with mass cable and gas hose, rolls 1,0-1,2 mm.
Standard intermediate cable lengths 5 m, as an option 1,2 m; 10 m or 15 m.
Unpack and weld!
The FANMIG 340i is a compact device, i.e. the power source and feeder are in one housing. The device is powered by a three-phase power supply of 3x400 V.
The 4-roll wire feeder allows welding with wire from 15 kg / K300 spools.
Recommended diameters of steel wires are 0,8 mm; 1,0 mm or 1,2 mm, for aluminium 1,0 mm. After changing the polarity, you can also use flux self-shielding wires Ø0,8-0,9 mm.
Basic application:
Welding set – FANMIF 340i includes:
The FANMIG 340i is a modern inverter semi-automatic welding machine for MIG/MAG or coated electrode MMA welding .
Unpack and weld!
PONTE 201 PRO MOST - inverter rectifier for welding with coated electrode.
Modern electronic solutions allowed to reduce the weight of the machine. PONTE 201 has a liquid crystal display showing the welding current in amperes. The body of the inverter is durable and aesthetically designed, the plastic elements on its edges protect it from damage in case of a fall. Large current sockets of the 35/50 type were used to connect the welding cables. In terms of welding current and arc stability, the PONTE 201 will satisfy even demanding welders, despite the fact that it is a device with a very simple design.
Features:
Welding Set- PONTE 201 PRO includes:
Designed mainly for hobby and workshop applications, but also works well in industry.
MMA machine for coated electrode welding.
Unpack and weld!
The PONTIG 202 AC/DC is an inverter welding rectifier for TIG welding of aluminium (TIG AC current) or steel and stainless steel (TIG DC current) or MMA (Stick) coated electrode. PONTIG 202 AC/DC is welding machine using TIG performed with a constant or pulsating current of up to 200 Hz. When welding with alternate current TIG AC, the adjustment frequency and balance are available to reach effectiveness while maintaining high quality of the weld.
The MMA method includes HotStart and ArcForce functions, PONTIG 202 AC/DC has all the additional functions needed for professional TIG welding (gas pre- and post-flow, current slopes, crater filling, etc.).
Main applications for this device include light and medium intensive welding in:
Welding Set – PONTIG 202 AC/DC MOST includes:
Design for TIG AC/DC and MMA welding.
Unpack and weld!
FANMIG J5 MOST is a modern semi-automatic inverter for MIG/MAG welding. The device is designed for steel and stainless steel welding in shielding gas environment.
Advantages of FANMIG J5 MOST
WELDING SET - FANMIG J5 includes:
Designed mainly for hobby and workshop applications, but also works well in industry.
MIG/MAG, TIG Lift and MMA welding.
Unpack and weld!
RYWAL-RHC is one of the largest welding distributors in Europe. The company offers a wide range of welding materials, various types of welding equipment, as well as gas cutting machines, PPE and many other products used in metalworking processes.
Our own brands MOST & GOLD give our partners and customers the opportunity to develop and grow . We invite you to cooperate with us - distributors welcome.
Plan your visit to the trade fair!
