Via Leonardo da Vinci, 15-17
IT 26010 Campagnola Cremasca (CR)
Contact
Ms. Martina Begni
  • +390373633182
  • +39 389 4418387
  • E-mail
Product range

Pre-heating and heat treatment machines - Induction method

Pre-heating and heat treatment machines - Induction method

Suntec has also a range of induction heating machines: INTI SERIES

INTI SERIES includes induction heating machines with different powers (40 - 60 -80 – 150 KVA) suitable for preheating, PWHT, shrinking, unshrinking and coating. All these machines are equipped with a programming unit and the possibility to connect an external recorder. (https://suntec.it/en/lq-project/inti-series/ )

These machines are available with two types of configuration :

  • air cooled (mostly used for rapid and low temperature preheating)
  • water- cooled (mostly used for long and high temperature pre-heating).

They can be used with different kind of inductors according to the application.

We have various solutions which can be applied in different sectors. For example:

PIPELINE: rigid and/or openable clamp coils which can be used both for preheating and coating operations  

WIND TOWER:  “paddle inductor” which is used for the preheating of big rotating pieces

Product range

Pre-heating of rotating pieces - Induction method - WIND TOWER

Pre-heating of rotating pieces - Induction method  - WIND TOWER

Suntec has developed a special solution to be applied during the construction of offshore and onshore wind turbine towers.

It is a particular and simple induction system with a specific "paddle" inductor for the controlled preheating before welding of big rotating shells which allows a faster, safer, more effective and accurate preheating instead of using open-flame.

Example: shell diam. 8500/9500mm thk.96-106mm preheated to 180°c (internally in about 90/130 min)

Product range

Pre-heating and heat treatment machines - Ceramic heating elements / Infrared Panels

Pre-heating and heat treatment machines - Ceramic heating elements / Infrared Panels

Suntec has a wide range of heat treatment machines using ceramic resistances and infrared panels methods, divided in two big families:

  • LOW TENSION heat treatment machines: IHR 10,5/1 - Compact series
  • NETWORK TENSION heat treatment machines: R3/R6 EVO - ROCK series

IHR 10,5/1 (LOW TENSION) is a portable inverter heater unit for preheating and PWHT, one channel where can be connected up to 4 ceramic heating elements (24-60V 45A) and an integrated recording unit for thermal cycles (https://suntec.it/en/lq-project/ihr-series/ )

Compact series (LOW TENSION) are machines with different powers between 27 and 110KVA and the quantity of independent outputs variable between 3-6-12: this wide range allows customers to choose the most suitable machine according to their needs. With these machines you can use both ceramic heating elements and infrared panels. (https://suntec.it/en/compact-series/ )

Compact series is available in two different versions: 

  • COMPACT-VT: variable tension 0÷90V : the machine automatically regulates the outgoing current on heating elements according to their size and tension
  • COMPACT: fixed tension 45 or 90V (or 32,5V – 65V according to the model) : the machine works with only two types of heating elements

EVO series (NETWORK TENSION) are portable resistance machines with 3 or 6 independent outputs where can be connected one heating element for each output with variable tensions between 40V and 400V with power up to 20KVA. 

EVO series is very space-saving and lightweight and it is assembled in a strong suitcase with wheels which can be easily carried as a trolley. (https://suntec.it/en/lq-project/r3evo-2/  - https://suntec.it/en/lq-project/r6vo/ )

 

VPR PROGRAMMER AND RECORDER UNIT
Each machine of Compact and EVO series is equipped with a digital touch screen video graphic programmer/recorder “all in one” with the following characteristics:
• TFT 7” touch screen display, 800x480 pixel
with backlighting
• Degrees °C or °F
• Thermal cycle set up
• 8GB recorded cycles memory
• Recorded cycles download on USB key
• Status alarm (High and low temperature, interrupted thermocouple)
• Multilanguage
• Integrated instruction manual
• Protection Degree IP65

Suntec heat treatment machines employ DIODE SCR technology for the outgoing power control and they are standardly equipped with a digital touchscreen video graphic programmer/recorder VPR and the download of thermal cycles is done by USB key.

ROCK SERIES (NETWORK TENSION) are heat treatment machines from 360KVA up to 1010KVA.
The standard configuration is with a multichannel programmer DP2 and 1 No. six channel recorder mod. SHINKO (Other programming and recording units available upon request) (https://suntec.it/en/lq-project/rock-series/

 

 

Company profile

SUNTEC Heating Systems : your heating issue is our distinctive skill.

Suntec is a solid company in the sector of localized heat treatment on welds. Young in year, but experienced at heart, Suntec can rely on the long and specific matured on ground experience of its founders, on the reliability of its qualified personnel and on the close cooperation with specialized partners, in order to give a 360-degree service to customers.

Suntec offers equipment with different heating methods:

  • CERAMIC HEATING ELEMENTS
  • INDUCTION
  • INFRARED PANELS
  • JOULE EFFECT

This flexibility finds easy application in different industrial sectors:

  • Petrochemical
  • Oil&gas
  • Shipyard
  • Energetic
  • Nuclear
  • Pressure Vessel
  • Constructions
  • Transports

Not only sales but also other services such as rental, maintenance, service on site and training, to answer to each single needs.

Experience, quality and innovation technology, to build a tailor-made offer and find “all included” solutions according to customer’s needs.

Contacts:

SUNTEC srl

Via Leonardo da Vinci,15-17 - 26010 Campagnola Cr. (Italy)

Telephone +39 0373 633182

e-mail: info@suntec.it

website:  http://www.suntec.it

×