Max-Eyth-Strasse 1
DE Gießen 35394
Product range

Nelson® Weld Studs

Nelson® offers a full line of standard in-stock fasteners for quick shipment, as well as custom-designed fasteners to meet your specific needs. If you wish to see design specifications, special application procedures, and part number information for a particular category of fasteners, choose from the available selections below. If you can’t find what you are looking for, please contact a Nelson® sales and service expert to find recommendations for your project or application.

 

Core Construction Weld Studs:

S3L Shear Connectors

  • Composite design, joining concrete to steel
  • Increases loading capacity in bridges, buildings, etc.

H4L Concrete Anchors

  • Embedment plates
  • Frames and curbing
  • LNG vessels
  • Precast industry

PSR Punching Shear Resistor

  • High-shear load areas in concrete construction
  • Reduces the amount of reinforcement needed
  • Eliminates column capitals

D2L Deformed Bar Anchors

  • Precast columns & beam connections
  • Shear walls
  • Slab closure angles

NEW D6L A706 Stud Weldable Rebar

  • Ductile concrete connections
  • Seismic reinforcement applications
  • Threaded, bent & straight stud applications
  • Coupled connections to main concrete reinforcement

More In-Stock Studs

  • ANC Unthreaded Stored Arc® Studs
  • ATC Threaded Stored Arc® Studs
  • ATS Threaded Stored Arc® Studs
  • AXC "Fir Tree" Studs
  • CFL Fully Threaded Studs
  • CFP Small Diameter Threaded Studs
  • CFX Threaded with Special Weld Base
  • CKL Collar Studs
  • CPL Partially Threaded Studs
  • D2L Deformed Bar Anchor
  • H4L Headed Concrete Anchors (HCA)
  • H8L Axle Spring Retainer Studs
  • H8X "T" Studs
  • L2L Lagging Stud with Hole
  • Metric MD Fully Threaded Studs
  • Metric MR Reduced Base Studs
  • NBL No Thread Studs
  • NKL Non-Threaded Collar Studs
  • SC-KRB GMBH Kragenbolsen (Grounded Stud)
  • TBL Internally Threaded Studs
  • TBX Internally Threaded Studs with Special Weld Base
  • TFTA Flanged Threaded Capacitor Discharge Studs
  • TFTC Flanged Threaded Capacitor Discharge Studs
  • TFTS Flanged Threaded Capacitor Discharge Studs
  • TPC Single Pointed Insulation Pins
  • WTOP Short Cycle Threaded with Large Flange
  • Miscellaneous
  • Speed Clips
  • Watertight Nuts with Lock
Product range

TGX-M Manual Gun Manual gun with linear motor for drawn arc stud welding

The TGX-M manual gun is the logical evolution of the proven Tucker PLM560 manual gun for drawn arc stud welding. Ideal areas of use are prototype production at low volumes and rework stations. Nevertheless, the TGX-M gun offers absolute reliability and the best welding results; even with intensive continuous use. Compared to its predecessor, the TGX gun has been extensively revised and improved in key areas. From now on, the linear actuator with directly connected measuring system forms the core component of the TGX guns. This central system has been designed and intensively tested for repeatable, precise movements. Furthermore, new mouthpieces with outlets in combination with a seal reduce dirt accumulation due to the welding process. This manual version of the TGX series meets a wide range of requirements in terms of weld stud processability, base materials and surface finishes. AC welding (in combination with AC power source) and the use of shielding gas are also possible. Improved welding results in challenging steel applications as well as aluminum stud welding are mastered by the gun with excellence. The design of the TGX-M allows the user to adapt the gun to a wide range of stud geometries via a change of the frontend.

Product range

TUCKER CleanJet TH539 - Surface Cleaning For Perfect Aluminium Stud Welding

For aluminium stud welding, a clean surface of the workpiece is a basic requirement for a good welding result. Any kind of contamination such as dry lubricants or added oils added to during the part’s pressing process must be removed. Using Tucker CleanJet removes these surface contaminations with a specially designed plasma torch directly prior to the actual stud welding, making it a seamless process with no opportunity for re-contamination. This results in enhanced process stability, single-digit PPM, increased joint strength, less rework and less washing of components. Completely controllable and evaluable via the Tucker HMI (Human Machine Interface), industry-proven components were used and adapted to the needs of the automotive industry Tucker CleanJet TH539 - not only to achieve greater cost savings, but also leads to a more sustainable environment.

Product range

Nelson® N550c Arc Charger

The N550c Arc Charger™ is the first of a revolutionary new class of stud welding power sources developed around Nelson’s patent pending Arc Charger™ platform. The N550c Arc Charger™ has the capacity to weld the full range of drawn arc studs, up to 3/8” pitch (M8) diameter, with an ultra-smooth high-speed switching welding arc, while requiring power from just a standard household 120V wall outlet! This breakthrough combination enables high-strength drawn arc stud welding in just about any location, without the need for high voltage, industrial 3-phase power, or a large generator.

 

Nelson N550c Arc Charger Specifications:

  • 120V input voltage
  • 3A to 15A input current, user adjustable
  • 60 Hz input line frequency
  • Welds 6-3/8” pitch studs per minute
  • Welds 15-3/16” studs per minute
  • 3/8” pitch maximum diameter for steel, stainless steel, and aluminum studs
  • 9 ft. (2.75 m) power cord
  • 86 lbs. (39 kg)
  • Standard 120VAC, 3-prong, grounded input power connection
  • 25W maximum idle power
  • Touch pad display with graphical diagnostics

 

Product range

Nelson® N900b Flexible Arc Control System (FACS)

The Nelson® N900b Flexible Arc Control System (FACS) offers a patented, battery powered design capable of delivering hundreds of welds from a single charge. The N900b FACS has the capacity to weld about 1,200 ¼” diameter studs, 400 3/8” diameter studs, or over 200 1/2” diameter studs. Utilizing a standard 120V household wall outlet, the N900b FACS environmentally friendly battery will be fully charged within just 2-3 hours. The new FACS-equipped N900b features a bright 7” LCD touch screen display, providing a new level of user communication. Achieve unparalleled flexibility and weld nearly anywhere with the cordless N900b FACS. AVAILABLE FOR RENTAL ONLY.

Company profile

Advanced Stud Welding For Automotive & Industrial Applications

STANLEY Engineered Fastening provides fastening and joining solutions for the automotive and general industries, comprising consulting, volume parts and equipment.

Join Tucker and Nelson – STANLEY Engineered Fastening’s iconic brands in the fastening and welding industry – at SCHWEISSEN & SCHNEIDEN 2023 as we create global synergies in stud welding and joining applications with our world-class product portfolio. Our combined presence at this premier industrial tradeshow in Essen, Germany, serves as a springboard into the future of industry-leading joining solutions. By combining our strengths, we aim to provide an experience that demonstrates our commitment to innovation, quality and customer satisfaction.

STANLEY Engineered Fastening Teknologies means: everything from one source

 

×