▪ Plasma CNC function equipped
▪ Pilot arc controller, Working Mode:
Cut/Grid/Marking/Gouge
▪ 3.5 inch LCD screen: Variety of parameter shown simultaneously
▪ Various error code display
▪ Automatic sensor for manual or
machine plasma torch
▪ Intelligent protection: TIP torch connection alarm, Over-current, Over-heat
alarm
▪ Phase loss protection,Low voltage
protection
▪ Soft Switching: low consumption,
increase IGBT age, small but stable

▪ Plasma CNC function equipped
▪ Pilot arc controller, Working Mode:
Cut/Grid/Marking/Gouge
▪ 3.5 inch LCD screen: Variety of parameter shown simultaneously
▪ Various error code display
▪ Automatic sensor for manual or
machine plasma torch
▪ Intelligent protection: TIP torch connection alarm, Over-current, Over-heat
alarm
▪ Phase loss protection,Low voltage
protection
▪ Soft Switching: low consumption,
increase IGBT age, small but stable

▪ Special designed 1set for MIG&TIG machine
▪ Solid in structure and easy to use outdoors
▪ Water cooler&toolbox optional based on requirement
▪ Water cooler 2 options:powered by internal connection of power source. or get power
from power grid directly
▪ Cooler&toolbox mounted to the bottom of the power source,saving floor space in your
welding field

▪ MCU: Digital control, Easy to update
▪ True Multi-process: MMA/TIG/MIG in
One Model
▪ 2T/4T optional
▪ Gas optional: CO2 or mix gas
▪ Anti-sticking, Arc force, Hot start
▪ Current preset and Real-time display
▪ Microprocessor precise controlled
▪ Soft Switching: low consumption,
increase IGBT age
▪ Intelligent protection: Over-voltage,Low-voltage, Over-current, Over-heat
alarm

▪Anti-sticking, Arc force, Hot start
▪ MCU: Digital control
▪ IGBT Module: adopt IGBT module- more
dust-proof, anti-electrical conductive;
▪ Multi-wave control: Triangle wave, Sine
Wave, Rectangle Wave, Trapezoid Wave
▪ AC balance: controls the amount of oxide
cleaning, high quality performance on Aluminum
▪ Remote control (foot pedal/up&down &
potentiometer torch selectable)
▪Smart-V technology: OCV adjustable, better
ignition, lower Loss
▪ Long output cables: with output voltage
compensation function, output cable can reach
50m
▪ Intelligent protection: Low-voltage, Over-current, Over-heat
▪ Water shortage alarm: Built-in water-flow
sens

▪ Anti-sticking, Arc force, Hot start, Arc length
▪ MCU: Digital control
▪ High OCV Value,Cellulosic electrode capability 6010/6011
▪ Intelligent protection: Low-voltage, Over-current, Over-heat
▪ IGBT Module: adopt IGBT module- more
dust-proof, anti-electrical conductive
▪ VRD/Smart-V selectable
▪ Plastic panel selectable
▪ Remote control (foot pedal/up&down &
potentiometer torch selectable)
▪ Water shortage alarm: Built-in water-flow
senso

Anti-sticking, Arc force, Hot start, Arc
length
Intelligent protection: Over-voltage,Low-voltage, Over-current, Over-heat
IGBT Module: adopt IGBT module- more
dust-proof, anti-electrical conductive;
VRD/Smart-V selectable
Plastic panel selectable
Remote control function optional

▪ Water cooler 2 options:powered by
internal connection of power source,
or get power from power grid directly
▪ Mounted to the bottom of the power
source,saving floor space in your
welding field
▪ Working capacity≥10000h
▪ Water-shortage alarm, error code
display, protect the welding torch and
power sourece from damage, extend
lifetime(MAGIC COOLING-II)
▪ Water cooler & toolbox optional based
on requirement

True Multi-process （4 in1）
Pilot arc controller,working mode:cut/grid
PFC technology
5.0 inch LCD screen
Memory function
OLED MIG torch for remote control 
Spool Gun optioal
MCU
Soft switching
MAX 15-20kg spool
intelligent protection

▪ True Multi-process (5 in 1): AC/DC
MMA;LIFT AC/DC TIG; HF AC/DC TIG;
MIG; Plasma in One Model
▪ Pilot arc controller, Working
Mode:Cut/Grid
▪ PFC technology: Single phase input from
95V to 275V, Power factor=0.99 for energy
save
▪ Memory function:9 channels for recording
▪ 5.0 inch LCD screen: Variety of parameter shown simultaneously
▪ Wireless connection: Remote control by
APP on smart-phone/tablet, Future design
for upload/download data to Cloud, Easy for
after sale service.
▪ OLED MIG torch for remote control
▪ Spool Gun optional
▪ MCU: Digital control
▪ Soft Switching: low consumption,
increase IGBT age
▪ Max 15~20kg Spool
▪ Intelligent protection: TIP torch connection alarm, Over-current,Over-heat

▪ True Multi-process (4 in 1): AC/DC MMA;
LIFT AC/DC TIG; HF AC/DC TIG; MIG in One
Model
▪ PFC technology: Single phase input from 95V
to 275V, Power factor=0.99 for energy save
▪ Memory function:9 channels for recording
5.0 inch LCD screen: Variety of parameter
shown simultaneously
▪ Wireless connection: Remote control by APP
on smart-phone/tablet, Future design for
upload/download data to Cloud, Easy for after
sale service.
▪ OLED MIG torch for remote control is
optional
▪ Spool Gun optional
▪ MCU: Digital control
▪ Soft Switching: low consumption, increase
IGBT age
▪ Max 15~20kg Spool

•5KG spool size, portable for
DIY and Light-Industry
•True Multi-process(4 in 1):
AC/DC MMA;LIFT AC/DC TIG;HF
AC/DCTIG;MIG in One Model
•PFC technology: Single phase
input from 95V to 275V ,Power
factor=0.99 for energy save
•Memory function: 9 channels
for recording
•4.3 inch LCD screen,user friendly
•AC Waveform: Square/Triangle
/Sinewave/Trapezium waveform
•Remote control function:
Up/down&pot torch&foot pedal optional
•Wireless connection: Wireless
foot pedal optional
•MCU: Digital control
•Advanced Soft Switching
technology
•Smart-V/VRD function optional
based on marke need
•ECO design for latest EU
regulation on efficiency
•Fan on demand for energy saving
and noise reduction

▪ 4.3 inch LCD screen: Variety of parameter
shown simultaneously ( MAGIC GMIG 200CE)
▪ True Multi-process: MMA/TIG/MIG in One
Model
▪ Microprocessor precise controlled
▪ Protected and compatible with Generator
▪ Soft Switching: low consumption, increase
IGBT age
▪ PFC technology: Single phase input from 95V
to 275V, Power factor=0.99 for energy save
▪ Memory function:9 channels for recording
( MAGIC GMIG 200CE)
▪ Max 5kg Spool

▪ 2.8 inch LCD screen: Variety of parameter shown
Simultaneously
▪ AC balance: controls the amount of oxide cleaning, high quality
welds on Aluminum
▪ Anti-sticking, Arc force, Hot start
▪ Electric HF ignition: Easy arc striking
▪ Microprocessor precise controlled
▪ Higher AC frequency (50-250Hz) ,fast travel speed
▪ Smart-V technology: OCV adjustable, better ignition, lower
loss
▪ Soft Switching: low consumption, increase IGBT age, small but
stable
▪ Intelligent protection: Over-voltage, Low-voltage, Over-current, Over-heat
▪ PFC technology: Single phase input from 95V to 275V, Power
factor=0.99 for energy save
▪ TIG Pulse function and all Pulse parameters can be adjusted
▪ Multi-wave control: Triangle wave, Sine Wave,
Rectangle Wave, Trapezoidal Wave
▪ Remote control: can choose remote up/down&potentiometer
torch&foot pedal through LCD screen
▪ Spot welding and stitch welding selectable
▪ Memory function:6 channels for recording

Anti-sticking, Arc force, Hot start
▪ Electric HF ignition: Easy arc striking
▪ MCU: Digital control
▪ TIG Pulse function and all Pulse parameters can be
adjusted
▪ Intelligent protection: Over-voltage, Low-voltage,
Over-current, Over-heat
▪ Soft Switching: low consumption, increase IGBT
age, small but stable
▪ PFC technology: input from 95V to 275V, Power
factor=0.99 for energy save

Digital Display
capability 6010/6011
High OCV value, Cellulosic electrode
Lift TIG optional
Anti-sticking, Arc force, Hot start
High duty cycle(40 10min) 40% @200A ℃
Soft Switching: low consumption, increase
IGBT age, small but stable
Intelligent protection: Over-voltage,
Low-voltage, Over-current, Over-heat

▪ Easy to operate: small in size and
price focus
▪ MMA/ DC lift TIG/DC HF TIG Fitted
▪ Anti-sticking, Arc force, Hot start
▪ Intelligent protection: Over-voltage.Low-voltage, Over-current,Over-heat
▪ Smart-V technology: OCV adjustable,
better ignition, lower loss

▪ Easy to operate: small in size and
price focus
▪ MMA/ DC lift TIG/DC HF TIG Fitted
▪ Anti-sticking, Arc force, Hot start
▪ Intelligent protection: Over-voltage.Low-voltage, Over-current,Over-heat
▪ Smart-V technology: OCV adjustable,
better ignition, lower loss

▪ Single MIG, easy to operate
▪ Intelligent protection: Over-voltage,
Low-voltage, Over-current Over-heat
▪ MIG Torch connected
▪ Professional MIG welding performance
▪ Option for Self -Shielding Flux Cored
Wire
▪ 1KG/5KG spool selectable
▪ CE/ROHS compliance

▪ Digital display
▪ Easy to operate, small in size and price
focus
▪ Smart-V technology: OCV adjustable,
Better ignition, Lower power loss
▪ Anti-sticking, Arc force, Hot start
▪ Intelligent protection: Over-voltage,
Low-voltage, Over-current, Over-heat
▪ Lift TIG/MMA function
▪ CE/ROHS compliance

▪ Easy to operate, small in size and price
focus
▪ Smart-V technology: OCV adjustable,
Better ignition, lower loss
▪ Anti-sticking, Arc force, Hot start
▪ Intelligent protection: Over-voltage,
Low-voltage, Over-current, Over-heat
▪ CE/ROHS compliance

▪ Easy to operate, small in size and price
focus
▪ Smart-V technology: OCV adjustable,
Better ignition, lower loss
▪ Anti-sticking, Arc force, Hot start
▪ Intelligent protection: Over-voltage,
Low-voltage, Over-current, Over-heat
▪ CE/ROHS compliance

▪ Easy to operate, small in size and price
focus
▪Dual Volt technology, optional for
1ph-120/230V input.
▪ Smart-V technology: OCV adjustable,Better
ignition, lower loss
▪High OCV value, Cellulosic electrode
capacity- 6011
▪ Anti-sticking, Arc force, Hot start
▪ Intelligent protection: Over-voltage,
Low-voltage, Over-current, Over-heat

Magic AC TIG 250W/315W are new AC/DC models with high quality welding performance in Aluminum.

Multi-waveform output in AC mode:tri-angle wave/sine-wave/square-wave 

Electronic HF starter:for more consistent non-contact ignition and greater reliability on success ignition

Anti-arc broken function:ensure min current ignition and welding stability

Compatible with remote torch/up-down torch/pedal, automatically recognize by software

Magic CUT 60/100S are professional level plasma system for cutting thick metal/gouging/grid workpiece.

User-friendly: smaller size and light weight provides quality cutting in 25mm(60A) and 35mm(100A) 

Handheld and mechanized usage with CNC interface:20:1(default)/30:1/40:1/50:1 can be selected from DIP switch

Air-pressure can be displayed from meters on front panel,and there is low pressure protection to ensure the cutting performance

Safety protection when plasma torch consumables uninstalled properly