Unit 15, Brinell Way
GB NR31 0LU Great Yarmouth
Contact
Mr. Jurgen Riemeijer
  • +441493443800
  • +31653364214
  • E-mail

Product groups

Product range

NDT Solutions

NDT Solutions

TVC design and manufacture a range of NDT solutions for all your project needs.

Corrosion Detection without Excavation

Our compact, rugged systems is designed to detect corrosion in planted steel lighting columns through ordinary access doors, saving time and money in costly excavations.

Subsea Magnetic Particle Inspection

We manufacture a variety of subsea MPI systems for measuring magnetism, ultraviolet light, and white light. Hand-held, compact, or top side controlled systems ideally suited for shallow water or splash zone application.

Bespoke Laser Camera Inspection Systems

Our laser camera inspection systems are tailored to our client's specific requirements.

Amongst many other options, our systems can include:

  • Deployment vehicles for both straight pipe and bends
  • Inspection of root weld
  • Automated laser control for 360° inspection of root
  • Automatic defect recognition
  • Measurement of bevel profile and ovality, external girth welds, and cap profile 

Internal Pipe Cladding Measurement

Designed for high-resistivity, non-magnetic, or weakly-magnetic metallic protective linings on carbon steel and low alloy steel substrates, our system can provide spot checks or continuous readings of cladding thickness.

Combined Ultraviolet and White Light Measurement

Combined ultraviolet light and white light measurement in one hand-held device for use in many NDT applications.

Product range

Calibration Laboratory

Calibration Laboratory

With over 25 years' experience, our calibration service is second to none. Available on most types and makes of NDT and Welding Inspection equipment, either within our controlled laboratory environment or onsite at our customers' premises.

UKAS Accredited Calibration Laboratory

Our calibration laboratory has UKAS ISO 17025 accreditation for Ultrasonic Flaw Detection, Ultrasonic Thickness Measuring, Electrical Weld Monitoring & Welding Inspection Equipment.

ISO 9001 Quality Management System

TVC also operates an audited and approved ISO 9001 Quality Management System for the Service, Repair, and Calibration of NDT equipment.

International and UK Standards Calibrations

All our calibrations carried out to UK and international standards using equipment traceable to the National Physical Laboratory (NPL).

Onsite and Offsite Services

We can provide our UKAS and traceable calibration services at our calibration laboratory or at our customers sites so we can be flexible depending on your requirements.

Fast Turnaround

Our calibration services include Standard, Premium, and Fast Track turnaround for all your equipment and project needs.

NDT Equipment Supply

TVC offers a variety of Non-Destructive Testing equipment and consumables from well-known manufacturers at competitive prices.

Equipment Rental

In addition to supplying a wide range of NDT equipment, TVC also offers short- and long-term rental options including our weld monitoring data loggers and laser camera inspection systems.

Product range

Gas Monitoring

Gas Monitoring

TVC offers a range of gas monitoring equipment. Our products cover Gas Flow, Gas Analysis and Purge Monitoring.

Accurate Gas Flow Measurement

Gas flow rates can be verified precisely to ensure they comply with welding procedures, which reduces consumption waste.

Analysis of Gas Composition

Gas analysis equipment for moisture, oxygen, helium, nitrogen, and carbon dioxide to ensure the correct mixtures, reducing welding failures.

Dual Sensor Technology for Purging

Our handheld and portable gas purge systems combine the latest in optical sensor technology with low-power zirconia sensors which increase not only their resolution and repeatability but means they are non-depleting so cost less over their lifetime than equipment using chemical cells.

Colour-Coded Visual Screens and Alarms

With colour screens, indicators, optional alarm beacons, and user-programmable alarm limits, our analysis and purge systems provide clear indications of alarm status.

Automatic Flow Control

Easily programmable, the three-stage flow controller offers full automation for all gas purging activities. By controlling purge gas flow according to Oxygen levels, the system enables quick, accurate and efficient purging.

Cost-Saving Benefits

Our equipment ensures only the optimum gas amounts are used which increases cost-savings by reducing gas wastage.

Product range

CALSIS; Visual inspection, and measurement, of internal root profile of pipeline welds.

CALSIS; Visual inspection, and measurement, of internal root profile of pipeline welds.

The CALSIS is currently in use on landlines inspecting, and measuring root profile in stainless steel and clad pipe welds. The interchangeable scanning heads and wheel sets allow the CALSIS to operate in pipe sizes from as small as 110mm I.D., making this the most versatile internal inspection tool of its kind.

The CALSIS can be deployed either as an independent unit driven by an electric crawler, on reach rods, or attached to the pipeline internal line up clamp (depending on project requirements). The 1-kilometre wireless transmission system makes the CALSIS the perfect tool for land line closing welds, allowing the inspector clear HD video, and root profile measurement down to 50 microns resolution.

Product range

Weld Montitoring

Weld Montitoring

TVC is the home of weld monitoring equipment. There is a monitoring solution to suit every requirement and budget, from the all-inclusive ALX III Series to the more basic MonArc 4.0.

Seamless Digital Exchange

Our next generation of weld monitoring and data logging systems combine the latest software advances to facilitate the seamless digital exchange of welding data at all levels for IoT and Industry 4.0 compliance. With wireless capabilities for network connectivity and TVC wireless sensors, VNC interface software, and remote assistance, it doesn’t matter where in the world you are.

 

Cloud-Based Database

When networked to the TVC Edge Server, systems can be used with the TVC WeldGlobe cloud-based database software, allowing remote logging and display of:

  • Production welding
  • Procedure qualification
  • Welder qualification
  • Document storage

Specialist Software

TVC has several specialist software packages available. All our Pulse Reporting software includes real-time pulse energy calculation and display in accordance with:

  •  ASME IX (2015)
  • EEMUA Publication 158 (Third Edition)
  • PD ISO/TR 18491:2015

We create bespoke programmes to suit your needs so contact us with any special requirements. 

Welding Applications and Techniques

Our monitoring systems are TIG High Frequency protected and are for use with:

  • MMA applications
  • MIG applications
  • TIG (AC/DC) applications
  • Subarc applications
  • Fluxcore applications
  • Manual welding systems
  • Semi-automatic welding systems
  • Fully automatic welding systems
  • Robotic welding systems

Durable and Flexible

Durable, hardworking, and designed to withstand demanding conditions, TVC weld monitors and data logging systems are equally at home monitoring welding procedures, qualifying welders, or in a laboratory setting for precision welding of fine components and exotic materials. For ultimate flexibility, all options can be retrofitted.

Company profile

TVC is a technology and service company serving the welding, inspection, and non-destructive testing (NDT) industries since 1995. TVC has become a global leader in data acquisition, logging solutions, and inspection equipment by developing, manufacturing, and marketing first- rate monitoring systems. Our next generation of weld monitoring and data logging systems combine the latest software advances to facilitate the seamless digital exchange of welding data at all levels for IoT and Industry 4.0 compliance. With wireless capabilities for network connectivity and TVC wireless sensors, VNC interface software, and remote assistance, it doesn't matter where in the world you are.

We are an ISO 17025:2017 UKAS accredited laboratory. This enables us to conduct BS EN 22232-1:2020 electrical verification of Ultrasonic Flaw Detection Equipment, BS EN 15317:2013 for Ultrasonic Thickness Measuring Equipment, and the electrical verification of Weld Monitoring and Welding Inspection Equipment with on-site and off-site capabilities . We also offer a traceable calibration and repair service for all types of NDT and Inspection Equipment. Our Calibration Laboratory is audited and approved to ISO 9001:2015 Quality Management System for the Service, Repair, and Calibration of NDT equipment, and calibrations are carried out to UK and international standards using equipment traceable to the National Physical Laboratory (NPL).

×